Sooooo I took out the DREMEL today...........................;)
Like Tree31Likes
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 44

Thread: Sooooo I took out the DREMEL today...........................;)

  1. #1
    XCR Guru Merlin's Avatar
    Join Date
    Sep 2007
    Posts
    5,839

    Sooooo I took out the DREMEL today...........................;)

    I don't know if it will help but after reading that other post about the feed ramps and magazines I thought it shouldn't hurt. Don't have the time to test it but did it anyway.

    Before;
    Sooooo I took out the DREMEL today...........................;)-dscn1717.jpgSooooo I took out the DREMEL today...........................;)-dscn1719.jpg

    After;
    Sooooo I took out the DREMEL today...........................;)-dscn1731.jpgSooooo I took out the DREMEL today...........................;)-dscn1733.jpg
    Bravo and crusoe like this.

    "Be Vigilant and Safe!!"
    "Molon Labe!!"
    "It Is A Weak Man Who Urges Compromise!!"

  2. #2
    XCR Guru Merlin's Avatar
    Join Date
    Sep 2007
    Posts
    5,839
    Then the problem was, I couldn't stop.......................

    Bravo, you know how it is when you have a DREMEL in hand.....................

    Before;
    Sooooo I took out the DREMEL today...........................;)-dscn1721.jpgSooooo I took out the DREMEL today...........................;)-dscn1723.jpg

    After;
    Sooooo I took out the DREMEL today...........................;)-dscn1726.jpgSooooo I took out the DREMEL today...........................;)-dscn1728.jpg
    Sean K., Bravo, SS.Pic and 1 others like this.

    "Be Vigilant and Safe!!"
    "Molon Labe!!"
    "It Is A Weak Man Who Urges Compromise!!"

  3. #3
    XCR Guru mjorin's Avatar
    Join Date
    Aug 2010
    Posts
    3,521
    Waiting with baited breath!
    "Spes Mea in Deo Est"--My hope is in GOD
    The antidote for fifty enemies is one friend.--Aristotle

  4. Remove Advertisements
    XCRForum.com
    Advertisements
     

  5. #4
    XCR Guru Bravo's Avatar
    Join Date
    Nov 2007
    Posts
    4,533
    Quote Originally Posted by mjorin View Post
    Waiting with baited breath!
    Eh, you know it's going to work.
    With Merlin, it's less dremel...... More wizardry
    Merlin and mjorin like this.
    Do you really think we want laws to be observed? We want them broken. There's no way to rule innocent men. The only power any government has is the power to crack down on criminals. When there aren't enough criminals, one makes them. One declares so many things to be crimes that it becomes impossible for men to live without breaking laws. Who wants law-abiding citizens? Pass the kind of laws that can’t be observed, enforced, or objectively interpreted - and you create a nation of law-breakers.

  6. #5
    XCR Guru Merlin's Avatar
    Join Date
    Sep 2007
    Posts
    5,839
    Quote Originally Posted by mjorin View Post
    Waiting with baited breath!
    I hope it works. I did not take too much material off, just wanted to polish more than anything else. I also did not make it into a "U", left it as the "W" since the rounds feed from either side of the magazine I thought it would centre more on getting the round into the chamber.

    I will certainly get back to how it works, just can't promise when..................
    mjorin likes this.

    "Be Vigilant and Safe!!"
    "Molon Labe!!"
    "It Is A Weak Man Who Urges Compromise!!"

  7. #6
    XCR Guru fmunk's Avatar
    Join Date
    Nov 2010
    Location
    Kahleefonia
    Posts
    3,103
    I see no reason why it wouldn't work. Any way to provide the round with a more direct path is going to help it feed better.
    SS.Pic likes this.
    Fool-proofing serves only one purpose: identify bigger fools.

  8. #7
    Expert SLCXCR's Avatar
    Join Date
    Nov 2009
    Location
    Salt Lake City
    Posts
    806
    'Dremel' Should summon Terra to the forums. It was always her first suggestion to fix problems...


    Paul
    Bravo, TexasChris, Merlin and 1 others like this.

  9. #8
    XCR Guru Sean K.'s Avatar
    Join Date
    Nov 2008
    Location
    AZ
    Posts
    21,481
    That is AWESOME!!!!
    "Necessity is the plea for every infringement of human liberty. It is the argument of tyrants; the creed of slaves."-William Pitt the Younger

  10. #9
    XCR Guru TerraShrewsbury's Avatar
    Join Date
    Sep 2007
    Location
    Salt Lake City
    Posts
    5,177
    Quote Originally Posted by SLCXCR View Post
    'Dremel' Should summon Terra to the forums. It was always her first suggestion to fix problems...


    Paul
    Oh, the beacon has been lit. And your overlord is displeased.
    Resident Forum Slut

  11. #10
    Marksman Benjamin Kurata's Avatar
    Join Date
    Sep 2009
    Posts
    322
    Ah, Dremel - keeping gunsmiths employed since.....?

    Good luck with the polishing! If it didn't work, at least it looks bitchin'!
    Merlin likes this.

Page 1 of 5 123 ... LastLast

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Now, even more Dremel work
    By gr8santini in forum General Discussion
    Replies: 30
    Last Post: 08-08-2012, 08:53 PM
  2. new pics Soldering Iron work (follow up to Dremel Work)
    By gr8santini in forum General Discussion
    Replies: 49
    Last Post: 07-14-2012, 07:47 PM
  3. Oh, sooooo soon, you will be mine....
    By TerraShrewsbury in forum Socializing
    Replies: 26
    Last Post: 01-24-2010, 04:35 PM
  4. Which would we be better with today?
    By Jbpark55 in forum Politicking
    Replies: 5
    Last Post: 08-19-2009, 09:35 AM
  5. Just In Today!!!!!!
    By jon1371usmc in forum Gallery
    Replies: 13
    Last Post: 05-08-2009, 10:42 AM

Search tags for this page

dremel m4 feed ramps for 7.62

,

news

Click on a term to search for related topics.