Keymod rails and the XCR
Like Tree1Likes
  • 1 Post By Sgwlower
Results 1 to 5 of 5

Thread: Keymod rails and the XCR

  1. #1
    Newbie Guardian's Avatar
    Join Date
    Feb 2015
    Posts
    7

    Keymod rails and the XCR

    So I did a quick search and couldnít find anything about this topic before doing this post. Although, I imgine it has probably been talked about before.

    I recently picked up a, new to me but used, keymod hand guarded version of the XCR-L. But, I noticed pretty quick that I canít get the barrel out with rail sections attached. Iím pretty sure itís the thin barrel but it is 6.5 grendel. It gets caught up at the chamber. Does anyone have a good brand of keymod pic rail that might have shorter screws that would let me get the barrel out without having to remove the keymod rail sections? I grab a rail section from PWS, havenít tried another brand yet but was thinking about order a BCM rail section, Thanks.

  2. #2
    XCR Guru Sean K.'s Avatar
    Join Date
    Nov 2008
    Location
    AZ
    Posts
    21,516
    I don't have any rail sections...but I have a BCM KAG that sits on the lower portion of just about all my XCRs and the bbls come out without any issues.
    "Necessity is the plea for every infringement of human liberty. It is the argument of tyrants; the creed of slaves."-William Pitt the Younger

  3. #3
    Carbineman fachries's Avatar
    Join Date
    Nov 2019
    Posts
    89
    Quote Originally Posted by Sean K. View Post
    I don't have any rail sections...but I have a BCM KAG that sits on the lower portion of just about all my XCRs and the bbls come out without any issues.
    +1

  4. Remove Advertisements
    XCRForum.com
    Advertisements

  5. #4
    Newbie Guardian's Avatar
    Join Date
    Feb 2015
    Posts
    7
    Great, Iíll give BCM a go thanks

  6. #5
    Newbie Sgwlower's Avatar
    Join Date
    May 2018
    Posts
    15
    Quote Originally Posted by Guardian View Post
    So I did a quick search and couldn’t find anything about this topic before doing this post. Although, I imgine it has probably been talked about before.

    I recently picked up a, new to me but used, keymod hand guarded version of the XCR-L. But, I noticed pretty quick that I can’t get the barrel out with rail sections attached. I’m pretty sure it’s the thin barrel but it is 6.5 grendel. It gets caught up at the chamber. Does anyone have a good brand of keymod pic rail that might have shorter screws that would let me get the barrel out without having to remove the keymod rail sections? I grab a rail section from PWS, haven’t tried another brand yet but was thinking about order a BCM rail section, Thanks.
    Arisaka low profile rails are your friend
    RobertSlaughter likes this.

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Tags for this Thread