XCR Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6,537 Posts
Take it apart and check the bolt release moves freely and that the ejector is tightly fastened to the reciever wall. Also check both protrusions to make sure they are not bent. check the bolt and carrier for any wear marks that should not be present. Check the recoil spring has tension and that there are no obstructions in the oprod.

If it is only happening a bit it is most likely the bolt release or ejector locking the bolt back.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top