XCR Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,177 Posts
Do you have it in with the holes on the side pointing in, towards the barrel? Sometimes if it's not in right that will happen.
There isn't really a fix, other than maybe replacing it and seeing if the slightly different tolerance helps. Try pulling out your op rod and gas tube, the whole assembly, and putting it all back in. See if that helps. If not, PM me.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top