XCR Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
6,835 Posts
I would just go by what Robarm has said here

http://www.robarm.com/XCR_Technical_Updates.htm

8 to 15 feet for ejected brass after breakin. Your rifle may do that on setting 4 but more than likely will do it on setting 3. I am not sure if it will cause more wear or tear but you would be getting more recoil for no more reliability.

Each rifle is different, hence the adjustable gas. Set it wherever you need to so that the brass ends up between those 2 numbers. If it is between those 2 I would think you are getting the best reliability and recoil.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top