XCR Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,177 Posts
Put the safety body back in, and hold it in the Fire position. Then take the little gold detent and put it back into the little hole it came out of. You will see a hole in the pistol grip - put the spring back in there. Then put the grip back on, aligning the detent and the spring. Screw the grip screw back in (make sure you have the silver washer on it), make sure your safety works, and you're good.

Happens all the time.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top