XCR Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
77 Posts
Discussion Starter · #1 ·
The upper has three areas that are definitely rails: left, right, and bottom.
There are four rows of slots that I question as being usable or decorative.
The left and right 45 degree facing up beside the gas tube appear to be decorative (speed holes or ventilation) because the back sides do not have flat back sides. They are sloped.
The left and right 45 degree facing down on the bottom are the ones that might be usable for mounting. They are recessed between the side and bottom rails, but something narrow like a sling mount might fit, and the position might be good for recessed between a rail cover (hand guard).

Is this doable or definitely a no-no?
 

·
Registered
Joined
·
23,031 Posts
Only the 3, 6 and 9 slots are for mounting. One could probably use the others....but that's not what they were designed for.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top