Yes.. He is a stand up guy and has great and honest prices. He is not trying to gouge people because of the current political climate. This guy is my first stop on mags.
Thanks XCR for the "heads up" on these mags. They are also cheaper that RA's price....
XCRFan link=topic=2560.msg3766OK here it is. I know of a site that has Pmags in stock right now. I just ordered some. In fact they have a lot of magazines in stock too. They have both 20 and 30 round Pmags.
[url=http://magsllc.com/shopdisplayproducts.asp?id=31&cat=PMags said:
The bodies won't dent like a USGI mag can and will,They have had issues with spine failure from what I've read,that said I have 6,and they are all fine although that not a definitive test by any means,and I've not subjected them to any abuse either.I've gotton over the P-mag phenomenon too,I think the C-products stainless steel 30 rounders with no-tilt follower,for .95 is still the best deal for a tough magazine.The finish is just so-so but that easily fixed too.
I think P-mags only come in 5.56 for now.The other mags,the C-products and the one from the website mentioned are both
C-products magazines from what I can tell.They come in 5.56x45,5.45x39,7,62x39,6.5 Grendel,6.8 SPC and for the AR-10 and variants 7.62x51.
Thanks Tread, would you happen to have a link or a website address for me to contact these people that you think may have the 7.62X39's that will work on our XCR's....I would really appreciate it!
SINKER
I think P-mags only come in 5.56 for now.The other mags,the C-products and the one from the website mentioned are both
C-products magazines from what I can tell.They come in 5.56x45,5.45x39,7,62x39,6.5 Grendel,6.8 SPC and for the AR-10 and variants 7.62x51.
I think P-mags only come in 5.56 for now.The other mags,the C-products and the one from the website mentioned are both
C-products magazines from what I can tell.They come in 5.56x45,5.45x39,7,62x39,6.5 Grendel,6.8 SPC and for the AR-10 and variants 7.62x51.
Heck, "Fans" link has CHEAP PRICES compaired to Midway USA's! To me there is a heck of a lot of difference in $42.00! and $18-19.00.. cripe, that is two for the price of one! lol
S
Hey thanks for the link XCRfan. I just ordered 10 Pmags from them and got a tracking number already. One of the few places that have windowless black pmags for under $15 in stock!
OK here it is. I know of a site that has Pmags in stock right now. I just ordered some. In fact they have a lot of magazines in stock too. They have both 20 and 30 round Pmags.
Just recieved my 30rd Pmags along with my 20rd's I ordered. Erik who runs Magsllc is great to work with. I did a second order before my first shipped out and he adjusted the shipping for me. He has many magazines in stock including 20rds with the Pmag followers. His pricing and shipping is very reasonable along with great communication. If you want a trustworthy source give him a try.
Not to detract too much from the topic. But which is better the Chrome Silicon Spring or the Stainless? I am thinking it does not really matter but each will have it own benefit.
[li]Chromed will flake and crack possibly after[ long term use?[/li]
[li]Stainless if kept loaded may have a tendency to weaken?[/li]
CHROME SILICON IS A MIXTURE IN THE SPRING (NO SHINE COATING) IT WILL KEEP IT'S SPRING LONGER, BUT WILL RUST. STAINLESS WILL NOT RUST, BUT HAS SHORTER LIFE SPAN. UP TO WHAT YOU WANT.
My personal choice would be chrome silicon. I have heard some CS springs go one-million cycles before wearing out. CS does rust, but for the most part, I don't shoot in the rain and keep my mags in doors.
However, if your a Navy Seal and do Scuba Missions, then Stainless would be the choice.
21 - 33 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
A forum community dedicated to XCR firearm owners and enthusiasts. Come join the discussion about optics, hunting, gunsmithing, styles, reviews, accessories, classifieds, and more!