XCR Forum banner

1 - 20 of 84 Posts

·
Registered
Joined
·
573 Posts
Re: I know, I'm awesome....

What would it cost a fella to order this list along with an extra firing pin and firing pin spring?

And yeah, you're awesome. 8)
 

·
Registered
Joined
·
5,177 Posts
Discussion Starter · #3 ·
Re: I know, I'm awesome....

Firing pin - 11.99
Firing pin spring - 1.00
Extractor cone - 4.00
Extractor spring - 1.00
Firing pin roll pin - .50
BHO Shaft - 5.98
BHO pin - 1.00
C Clip - 5.00
Ejector - 5.99
Ejector Screws (2) - 2.00
Hammer Axis pin - 6.99
Cotter pin - .50
Hammer spring - 3.00
Ejector washers (2) - .40
Main pin - 4.00
Recoil buffer - 5.00
Trigger axis pin - 3.99
Trigger spring - 3.00
+$10 Shipping
____________________

$75.34 Total
 
G

·
Re: I know, I'm awesome....

I would like to see the upper lower reciever hinge pin and that little retaining clip in this list as well. I had that clip fall off one time. it could ruin someones whole day that little thing.
 

·
Registered
Joined
·
1,475 Posts
Re: I know, I'm awesome....

I'm trying to remember the spare parts I just ordered Terra... pretty much everything other than the trigger components I think. I don't feel like they're the most likely area for murphy to bite my xcr in the butt ;D
 

·
Registered
Joined
·
5,177 Posts
Discussion Starter · #7 ·
Re: I know, I'm awesome....

yeah... the trigger and hammer axis pins aren't a must, but a lot of guys like to have them, and there is a small chance they'll wear out eventually. :)
 

·
Registered
Joined
·
5,177 Posts
Discussion Starter · #8 ·
Re: I know, I'm awesome....

I would like to see the upper lower reciever hinge pin and that little retaining clip in this list as well. I had that clip fall off one time. it could ruin someones whole day that little thing.
You're thinking of the Main Pin, I believe. I added the clip on for you, plus a couple other revisions.
 

·
Registered
Joined
·
87 Posts
Re: I know, I'm awesome....

Terra, that was very nice of you and Curtis to take the time to do this. Thanks! :)
 

·
Registered
Joined
·
19 Posts
Re: I know, I'm awesome....

Firing pin - 11.99
Firing pin spring - 1.00
Extractor cone - 4.00
Extractor spring - 1.00
Firing pin roll pin - .50
BHO Shaft - 5.98
BHO pin - 1.00
C Clip - 5.00
Ejector - 5.99
Ejector Screws (2) - 2.00
Hammer Axis pin - 6.99
Cotter pin - .50
Hammer spring - 3.00
Ejector washers (2) - .40
Main pin - 4.00
Recoil buffer - 5.00
Trigger axis pin - 3.99
Trigger spring - 3.00
+ Shipping
____________________

.34 Total
Are these parts being sold as a kit now?
 

·
Registered
Joined
·
5,177 Posts
Discussion Starter · #13 ·
Re: Recommended Parts List

You can buy them all as a kit, (sans the firing pin... unless you desperately need it) or you can mix and match as you want to.
 

·
Premium Member
Joined
·
1,045 Posts
Re: Recommended Parts List

I just ordered the new gas block from the RA website and was going to order the recommended parts list kit but couldn't find it anywhere on the site.

Terra, if you are going to be processing my gas block order could you add the parts kit to it?

Thanks!
 

·
Registered
Joined
·
133 Posts
Re: Recommended Parts List

Can i add a hammer forged 1-7 chrome lined barrel witth the kit? and i do have eye protection to keep the sharp sticks away >:D
 

·
Registered
Joined
·
6,526 Posts
Re: Recommended Parts List !UPDATED!

What is the cost for the parts kit with a completely assembled 5.56 bolt?
 

·
Registered
Joined
·
143 Posts
Re: Recommended Parts List !UPDATED!

Would it be possible to order other small parts in addition to the parts kit, like hammer, sear, trigger, etc? What about 6.8 bolt, carrier, extractor? Is there a detailed exploded parts diagram I could reference? I intend on keeping my rifle for the long hall!!!!
 
1 - 20 of 84 Posts
Top