XCR Forum banner

Which Loctite?

1489 Views 7 Replies 5 Participants Last post by  TEXAS SOLFTAIL
Hi Everyone,

So what is the best loctite to get for the XCR? Looking on the loctite website I would guess #243 or #264.
1 - 8 of 8 Posts
Manual says 222.
Manual says 222.
Unless you want to be able to remove it then use the Blue 242.
I like to be able to remove it if needed. So 242, then?

Regards,
Crashy
UDT is right. The 242 is a good kind to use. 222 works best. You should be okay using either.
G
I've had fine results with the blue so far.
Ok. I'll look for either.

Thanks for the replies everyone.

Regards,
Crashy
222 low strength(green) 224 medium strength(blue) 262 high strength (red) Don't use red unless you are willing to heat up the object with a torch!
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top